Demonfx Fuzz Works 7 Guitar Bass Effect Pedal Fuzz

FUZZ WORKS 7

Based on ZVEX EFFECTS Fuzz Factory 7

OVERVIEW:

The Fuzz Works 7 features a 9-position rotary sub switch that opens the pedal up to an astounding new bottom end as well as thin,reedy fuzzes.

The fuzz works equally well with both guitar and bass signals. There’s also a second stomp switch and an associated tone control.This passive tone control

operates much the way the one on your guitar does and when the stomp switch is activated it will let you roll off the high end of the fuzz sound so you

can mellow out the tone if you like.

The controls of the Fuzz Works 7 are arranged in a circle around a Lexan window that reveals two rare germanium transistors, individually

hand-tested for the perfect gain range and low leakage. These rare and magnificent-sounding transistors are illuminated by LEDs when the pedal

is engaged.

CONTROLS:

KNOBS: Although the six main control knobs are named for the parameters over which they seem to have the most control.They are controls for various

operating levels and biases, and basically shape you a personalized fuzz.

COMP:Adds attack characteristic when turned to left, which gets softer to right, and suddenly pinches tone when all the way right.Also use to

tune in fat feedbacky fuzz, if you’re that kind. Lower the Stability and see what happens to this control.

DRIVE:Increases distortion when used as a “normal” fuzz, and adjusts feedback pitch and tonal thickness, if you’re that kind. This control

becomes meaningless when Compress is all the way right.

STAB: Use all the way right. Do not attempt to adjust this control below 2:00, unless you like your fuzz soft and squishy. Use to con-trol feedback pitch.

FAT： a nine-position rotary switch that controls the internal tone of the fuzz, getting fatter and subbier to the left and thinner and reedier to the right. This switch will obviously

change the oscillation range of the pedal as well, when the other knobs are set to an oscillating or squealing tone.

TONE: This knob is activated by the left stomp switch. It’s a pas-sive tone control that mellows out the high end of the Fuzz Works7, like a simple

lo-pass filter.

VOLUME : Controls output volume.

GATE :Squelches noise after end of sustain. Turn to right to elimi-nate squeals, hiss and buzz, stopping just as they disappear, or use to tune in

exact feedback pitch, if you’re that kind. Turning to left opens gate.

WARNING: Many “incorrect” settings on this pedal squeal. This may annoy the faint- hearted. If you use the example

settings, you won’t get hurt. We don’t want to see anyone hurt. Don’t forget to memorize or write down your favorite

settings.

EXAMPLE SETTINGS

(These use ” o’clock” notation-not spinal

tap 1 to 11)

Comprssion fuzz:

Vol 10:00 | Gate 3:00 | Comp 9:00 |

Drive 5:00 | Stab 5:00

Velcro fuzz:

Vol 10:00 | Gate 7:00 | Comp 5:00 |

Drive 5:00 | Stab 2:00

Cleanish hi octave intermodulation:

Vol 10:00 | Gate 2-3:00 | Comp 7:00 |

Drive 7:00 | Stab 5:00

Smooth fuzz:

Vol 10:00 | Gate 7:00 | Comp 3:00 |

Drive 5:00 | Stab 5:00

(lower Stab is more mellow)

Radio fuzz:

Vol 10:00 | Gate 7:00 | Comp 10:00 |

Drive 12:00 | Stab 5:00

Lower from fully clockwise while playing

open ‘A’ with left hand.Stop at most

interesting tone.

POWER SUPPLY:

Please use a 9V DC power supply with (–)

polarity on the middle pin

(typical Boss™ power supply). Using the

incorrect supply may damage your pedal.